ELP Engineered Lighting Products
Products Projects Photometrics About Us ELP Reps
Product Selection Guide
Download Icon Meanings:  = Catalog Cut    = Installation Instructions
Video/Teleconferencing & Distance Learning < WALL WASHING    |    RETURN TO GUIDE >


We have provided a basic layout to show a typical Video Conference installation in a multi-use space. Additional details and considerations for Video/Tele Conference lighting may be found on the VT &VTTB Series cut sheet.

 

Light a Key Speaker with a wall wash type fixture. Because of the angled position, we chose to light this speaker from two sides.(The IW, IWTB & IWS Series have a hidden lamp for comfort.)
  

The VT, VTTB & VTS Series indirect 2 x 2 fixtures provide vertical illumination in three directions to comfortably light the participants without washing out the viewing screen.

When looking at other products compare these features:
  • High efficiency fixtures means designing with less fixtures.
  • Totally indirect, so the overly bright lamp is never in view.
  • Can be placed 1´ in front of the screen, and not wash it out.
  

Lighting the walls allows added control to balance the lighting in the room for video conferencing. Additionally, when the video conference fixtures are dimmed for non-video meetings, you can adjust the light levels on the walls.
 

The Camera for the Key Speaker is ordinarily mounted at the ceiling with a tight focus on the speaker. The camera would not have the ceiling (or lighting fixtures) in its view.

Zones of Control:
  • 2 x 2 Video Conference Fixtures.
  • Wall Washers along the two long walls.
  • Wall Washers at the back(South) wall.
  • Key Speaker Lighting.


 
Evenly illuminate the participants for the camera without washing out the viewing screen.
BASIC SIZE FIXTURE SERIES MOUNTING LENGTHS LAMPS DOWNLOADS
VT Series Recessed 24" Biax
VTTB Series T-Bar 24" Biax
VTS Series Surface, Pendent 24" Biax
VT Trimless Recessed 24" Biax
 

Illuminate the key speakers and walls to balance the illumination in the room.

BASIC SIZE FIXTURE SERIES MOUNTING LENGTHS LAMPS DOWNLOADS
AK Series Recessed 8-1/2" to 48" Quad, Triple Tube, Biax, T-5, T-8
AKCC Series Recessed Continuous 24" to 48" Biax, T-5, T-8
AKTB Series T-Bar 24" to 48" Biax, T-5, T-8
AKS Series Surface, Pendent 24" to 48" Biax, T-5, T-8
AK Trimless Recessed 8-1/2" to 48" Quad, Triple Tube, Biax, T-5, T-8
IW Series Recessed 24" to 48" Biax, T-5
IWCC Series Recessed Continuous 24" to 48" Biax, T-5
IWTB Series T-Bar 24" to 48" Biax, T-5
IWS Series Surface, Pendent 24" to 48" Biax, T-5
IW Trimless Recessed 24" to 48" Biax, T-5
MP Series Recessed 24" to 48" T-5
MPCC Series Recessed Continuous 24" to 48" T-5
MPTB Series T-Bar 24" to 48" T-5
MPS Series Surface, Pendent 24" to 48" T-5  
MP Trimless Recessed 24" to 48" T-5


 
< WALL WASHING    |    RETURN TO GUIDE >
PRODUCTS        PROJECTS        PHOTOMETRICS        ABOUT US        ELP REPS         Top
© 2007 Engineered Lighting Products, Inc. All rights reserved.
10768 Lower Azusa Road, El Monte, CA 91731
Site design by Rigney Graphics
Home        Send This Page        Privacy Policy        Contact Us
HomeTop